iii. Pull out the memory module from its slot.
Removing the Hard Disk Drive
To remove the hard disk drive, first remove the battery (see
following steps:
1. Remove the 2 screws securing the hard disk drive compartment cover.
2. Remove the 2 screws that secure the hard disk drive.
3. Carefully pull the Mylar to slide the hard disk drive assembly out of the bay.
Removing the Keyboard
To remove the keyboard, first remove the battery (see
steps:
Fig. 3 Releasing the memory side locks.
Fig. 4 Removing the hard disk drive cover.
Fig. 5 Removing the HDD assembly.
Packard Bell EasyNote L Disassembly Manual
Removing the
Battery), then perform the
Removing the
Battery), then perform the following
5