Reverse/Pause
Fast play
Slow play
Play Next
Play previous
Shuttle
(outer ring)
Jog
(inner dial)
RC indicator
Power indicator
Channel indicator
IR Receiver
Rear Panel
normal playback.
In live view, press this key to enter Search interface.
In normal playback or pause mode, click this button to reverse
playback
In reverse playback, click this button to pause playback.
Various fast speeds and normal playback.
Multiple slow play speeds or normal playback.
In playback mode, playback the next video
│
In menu setup, go to the bottom of the dropdown list.
│
In playback mode, playback the previous video
In live view, it works as left/right direction key.
In playback, counter clockwise to forward and clock wise to
backward.
Up/down direction key.
In playback, turn the inner dial to do frame by frame playback
when normal playback is paused.
ACT
Indicates if the DVR is active for remote control.
POWER
Indicates if the DVR is powered up
Indicates whether the system is recording or not. It turns on
1-16
when the system is recording.
Receives the signal from the remote controller.
HD-16DVR-C rear panel is shown as below. See
Figure 2-2 The Rear Panel of HD-16DVR-C
Please refer to the following table for detailed information.
Honeywell
Figure
2-2.
9