Honeywell HD-16DVR-C User Manual page 133

Parameter
DHCP
TCP Port
HTTP Port
Max Connection
Remote
PPPOE
Host
Email
The email interface is shown in
Function
Dynamically get IP address. You can get the device
IP from the DHCP server if you enabled this
function.
Default value is 37777.
Default value is 80.
Network user max amount. The value ranges from 0
to 10.
0 means there is no user can access current device.
Input the PPPoE user name and password you get
from the IPS (internet service provider) and enable
PPPoE function. Please save current setup and then
reboot the device to get the setup activated.
Device connects to the internet via PPPoE after
reboot. You can get the IP address in the WAN from
the IP address column.
Please note if you want to reboot the device please
make sure you have proper reboot authority and
there is no local login user in the current device.
Figure 6-33.
Honeywell
117