Connecting A Tv Or Monitor - VocoPro DVD-SOUNDMAN Owner's Manual

Getting Connected, cont.
Connecting a TV or Monitor to the DVD SOUNDMAN
Using Component (YPBPR) video:
What you will need:
• Component (YPBPR) video cable
• TV or monitor with component (YPBPR)
video inputs
To connect to a TV or Monitor:
1. Connect one end of the component
(YPBPR) cable to the Y, PB, PR
outputs on the rear panel of the DVD
SOUNDMAN.
2. Connect the other end of the
Component (YPBPR) cable to the
Component (YPBPR) jack on your TV or
Monitor.
NOTE: While some TVs automatically
switch when a video signal is detected, you
may need to manually switch your TV to
the correct video input. On most TVs, the
INPUT jack is labeled A/V, AUX or VIDEO
IN.
������������ ���� �����
14
��