Dsl Settings; Dhcp Server; Dhcp Settings - TP-Link TD-8840T User Manual

layer "control/data" protocols such as FTP, TFTP etc.
FTP ALG - To allow FTP clients and servers to transfer data across NAT, click Enable.
•
TFTP ALG - To allow TFTP clients and servers to transfer data across NAT, click
•
Enable.
Click the Save button to save your settings.

4.4.6 DSL Settings

Choose "Advanced Setup" "DSL Settings", you can select the DSL Modulation Type and
Annex Type in the next screen. The DSL feature can be selected when you meet the physical
connection problem. Please check the proper settings with your Internet service provider.
DSL Modulation Type: Select the DSL operation Modulation Type which your DSL
connection uses.
Annex Type: Select the DSL operation Annex Type which your DSL connection uses.
Click the Save button to save your settings.

4.5 DHCP Server

Choose "DHCP Server", you can see the next submenus:
Click any of them, and you will be able to configure the corresponding function.

4.5.1 DHCP Settings

Choose menu "DHCP Server" "DHCP Settings", you can configure the DHCP Server on the
page as shown in Figure 4-16.The Modem Router is set up by default as a DHCP (Dynamic Host
Configuration Protocol) server, which provides the TCP/IP configuration for all the PC(s) that are
connected to the Modem Router on the LAN.
TD-8840T ADSL2+ Modem Router User Guide
Figure 4-15
29