Important Safety Instructions - DSC PowerSeries PC1616 User Manual

To reduce the risk of fire, electric shock and/or injury, observe the following:
Do not spill any type of liquid on the equipment.
•
Do not attempt to service this product yourself. Opening or removing the cover may expose
•
you to dangerous voltage or other risk. Refer servicing to qualified service personnel. Never
open the device yourself.
Do not touch the equipment and its connected cables during an electrical storm; there may
•
be a risk of electric shock.
Do not use the Alarm System to report a gas leak if the system is near a leak.
•
REGULAR MAINTENANCE AND TROUBLESHOOTING
Keep your Alarm Controller in optimal condition by following all the instructions that are
included within this manual and/or marked on the product.
Clean the units by wiping with a damp cloth only.
•
Do not use abrasives, thinners, solvents or aerosol cleaners (spray polish) that may enter
•
through holes in the Alarm Controller and cause damage.
Do not use any water or any other liquid.
•
Do not wipe the front cover with alcohol.
•
Occasionally, you may have a problem with your Alarm Controller or telephone line. If this
happens, your Alarm Controller will identify the problem and displays an error message. Refer
to the provided list when you see an error message on the display. If additional help is
required, contact your distributor for service.
WARNING:
This equipment, PC1616/1832/1864 Alarm System shall be installed and used
within an environment that provides the pollution degree max 2 and over-voltages category II
non-hazardous locations, indoor only. It is designed to be installed, serviced and/or repaired
by service persons only [service person is defined as a person having the appropriate
technical training and experience necessary to be aware of hazards to which that person may
be exposed in performing a task and of measures to minimize the risks to that person or other
persons]. For EU and Australian markets, the equipment is permanently connected; an
accessible disconnect device shall be incorporated into the building installation wiring. For
North America the equipment is a direct plug-in connection; the socket outlet shall be installed
near the PC1616/1832/1864 and shall be easily accessible. The plug of the direct plug-in
transformer serves as the disconnect device.
There are no parts replaceable by the end-user within this equipment, except for the
NOTE:
keypad batteries.
This publication covers the following models:
PC1555RKZ
•
PK5508
•
PK5516
•
RFK5500
•

IMPORTANT SAFETY INSTRUCTIONS

TROUBLESHOOTING
RFK5508
•
RFK5516
•
RFK5501
•
RFK5564
•
CLEANING
PK5500
•
PK5501
•
LED5511
•
LCD5511
•