DSC Power832 PC5015 Instruction Manual page 9

PC5508(Z), PC5516(Z) and PC5532(Z) Keypads:
Press the keys on the number pad to view alarms or
troubles, to Arm/Disarm the system or to bypass zones.
To exit, press [#]; to select a function, press [ ].
PC5508(Z) LED Keypad
The PC5508, PC5508Z, PC5516 and PC5516Z Keypads are available for
applications with fewer than 32 zones. The functions explained in this manual are the
same for all three LED keypad types.
Ready Light
(All keypads)
If the Ready light is ON, the
system is ready for arming.
If the Ready light is OFF,
check to see that all doors and
windows are closed and that
all movement is stopped in
areas covered by motion
detectors. The system cannot
be armed unless the Ready
light is ON indicating that all
zones are closed and the
system is in the Ready state.
PC5516(Z) LED Keypad
:
Armed Light
If the Armed light is ON, the
system has been armed
successfully.
Trouble Light
If the Trouble light is ON,
check to see what the trouble
condition is and call for
service (See "Viewing Trouble
Conditions" on page 12).
PC5532(Z) LED Keypad
Memory Light
:
(All keypads)
Upon disarming, if an alarm has
occurred while the system was
armed, the Memory light will turn
ON (See "Disarming the System"
:
(All keypads) on page 6).
Bypass Light
If the Bypass light is ON, ensure
that zones are intentionally
bypassed before arming the
system (See "Zone Bypassing" on
page 11).
8
:
(LED keypads only)
:
(LED keypads only)