Keypad Options; Downloading Enable; Fire Alarm Operation - DSC New Classic PC585 Instruction Manual

To activate the door chime from an LCD Keypad:
Press [ ] to enter the function list, then scroll to find...
Press [ ] or [4] to enable or disable the Door Chime feature. Press [#] to return to
Press (*) For<>
the Ready state.
Door Chime

Keypad Options

All Keypads
Keypad Sounder Control
The LCD keypad will allow you to select from 21 different keypad tones. From an LCD keypad, enter
[ ][6][Master Code], then use the arrow keys (< >) to scroll to the message "Keypad Buzzer Control".
Press [ ] to select. Use the arrow keys (< >) to scroll to the desired keypad sound level and press the
[#] key to exit. This feature can be accessed on LED keypads by holding the [ ] key.
LCD Keypads Only
The following three options are accessed by entering [ ] [6] [Master code]. Use the arrow (< >)
keys to scroll to the appropriate message and press [ ] to select.
Brightness Control
The LCD keypad will allow you to select from 10 different backlighting levels. Use the arrow keys (< >)
to scroll to the desired backlighting level and press the [#] key to exit.
Contrast Control
The LCD keypad will allow you to select from 10 different display contrast levels. Use the arrow keys
(< >) to scroll to the desired contrast level and press the [#] key to exit.
Viewing the Event Buffer from an LCD Keypad
Select "View Event Buffer" from the [ ][6] menu. The keypad will display the event, event number, time
and date along with the zone number and user code, if applicable. Press [ ] to toggle between this
information and the event itself. Use the arrow keys (<>) to scroll through the events in the buffer.
When you have finished viewing the Event Buffer, press the [#] key to exit.

Downloading Enable

To enable a six-hour downloading window from any system keypad, enter [ ] [6] [Master code] [5].
During this time, the panel will answer incoming downloading calls. For more information, please ask
your installer.

Fire Alarm Operation

Alarm
On a fire alarm, the bell or siren will pulse ON and OFF. The transmission of the alarm to the monitoring
station is delayed for 30 seconds. If the alarm is not cleared within the 30 second delay, the it will be
transmitted to the monitoring station.
Silence
To silence the bell or siren, press the [#] key. If the alarm is silenced and the smoke detector is not
reset, the alarm will resound after 90 seconds.
Resetting Smoke Detectors
Once the smoke detector is reset, if it still detects smoke, the alarm sequence will resound as
described above. If there is no smoke, the system will return to normal.
To reset smoke detectors from an LED Keypad:
Press [ ][7][2].
14