Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for DSC PC55O
Summary of Contents for DSC PC55O
- Page 1 Instruction Manual PC55O With PC5OORK Keypad...
- Page 2 Industry Canada Notice NOTICE: The Industry Canada label identifies certified equipment. This certification means that the equipment meets certain telecommunications network protective, operational and safety requirements. Industry Canada does not guarantee the equipment will operate to the user’s satisfaction. Before installing this equipment, users should ensure that it is permissible to be connected to the facilities of the local telecommunications company.
-
Page 3: Table Of Contents
TABLE OF CONTENTS SYSTEM INFORMATION INTRODUCTION Test Your System Regularly ........................3 Important Notice ............................. 3 Glossary ..............................3 BASIC OPERATION Arming Your System ..........................4 Disarming Your System ........................... 4 ∗ Important Note About Keypad [ ] Commands ..................4 Bypassing Zones ............................ -
Page 4: System Information
SYSTEM INFORMATION Installer ___________________________________________________________________________________ Phone ________________________________ Installation Date ____________________________ Monitoring Station: _________________________ Telephone Number: _________________________ CONTACTS Name ________________________________ Phone ________________________ Name ________________________________ Phone ________________________ Name ________________________________ Phone ________________________ ZONE INFORMATION Zone Type Protected Area ____________________ _______________________________________________________ ____________________ _______________________________________________________ ____________________ _______________________________________________________ ____________________ _______________________________________________________ Entrance Delay ____________________________... -
Page 5: Introduction
Glossary Your DSC PC550 Security System has been designed to offer advanced security feature and simple, straight-forward operation. Described here are some terms that are used throughout this manual to explain the operation of your system. -
Page 6: Basic Operation
BASIC OPERATION Arming Your System Before arming the system, close all protected doors and windows, and stop movement in areas protected by motion detectors. When all zones are closed, all of the Zone Lights on the keypad will be OFF, and the “Ready”... -
Page 7: Bypassing Zones
Bypassing Zones A “bypassed” zone will not cause an alarm. Zones may be bypassed to allow access to part of the protected area while other zones are armed. For example, you could bypass the zone protecting your living room. This would allow you to remain in the room, while the other zones on your system are armed. ∗... -
Page 8: Arming Options
ARMING OPTIONS At-Home Arming At-Home Arming automatically bypasses the zones on your system programmed as Home-Away with Delay, and also removes the Entry Delay from the Entry-Exit Zones. This feature allows you to arm the system and remain on the premises. In addition, if any of the Entry-Exit doors are opened, an alarm will sound instantly. -
Page 9: Pc500Rk Keypad
PC500RK KEYPAD The “Ready” light will come ON when the Zone Lights 1 to 4 indicate zone activity. When a system is ready to be armed. When the zone is secure, its Zone Light will be OFF; when a “Ready” light is OFF, there is an open zone zone is open, its Zone Light will be ON. -
Page 10: Displaying System Information
DISPLAYING SYSTEM INFORMATION Display Alarm Memory Alarms generated when the system is armed are recorded in the system’s memory. To display the zones ∗ that went into alarm, enter [ ][3]. The “System” light will FLASH, and the zones that went into alarm will be displayed on the flashing Zone Lights. -
Page 11: Changing System Features
CHANGING SYSTEM FEATURES Changing Access Codes The PC550 features 4 programmable Access Codes. The first code is the Master Code, and the remaining three codes are normal Access Codes. ∗ Programming Access Codes: Enter [ ][5][Master Code]; the “Ready”, “Armed” and “System” lights will FLASH. -
Page 12: Testing And Maintenance
TESTING AND MAINTENANCE Bell Test Entering this command will sound the siren and turn ON all the keypad lights for 2 seconds. To perform a ∗ bell test, enter [ ][4] on the keypad. Weekly Testing It is recommended that you test your system weekly. NOTE: Perform system tests in the off-peak hours, such as early morning or late evening. -
Page 13: Limited Warranty
LIMITED WARRANTY Digital Security Controls Ltd. warrants that for a period of twelve months from the date of purchase, the product shall be free of defect in materials and workmanship under normal use and that in fulfilment of any breach of such warranty, Digital Security Controls Ltd. -
Page 14: Fcc Compliance Statement
FCC Compliance Statement CAUTION: Changes or modifications not expressly approved by Digital plug connected thereto is withdrawn, no interference to the operation of the Security Controls Ltd. could void your authority to use this equipment. equipment at the customer’s premises which remains connected to the telephone network shall occur by reason of such withdrawal. - Page 16 © 1996 Digital Security Controls Ltd. Toronto, Canada Printed in Canada 29000534 R3...