Reboot System - Draytek Vigor300B User Manual

Enable This Profile
Get Community
Set Community
Manager Host IP
Refresh
Apply
4 . 9 . 8 R e b o o t S
4 . 9 . 8 R e b o o t S
The Vigor router system can be restarted from a Web browser. You have to reboot the router
to invoke the configured settings that you made before.
If you want to reboot the router using the current configuration, choose Reboot with
Current Configurations and click Reboot. To reset the router settings to default values,
click Reboot with Factory Default Configurations and click Reboot. The router will take
a period of time to reboot the system.
Open System Maintenance>> Reboot System.
Available parameters are listed as follows:
Item
Reboot with Current
Configurations
Reboot with Factory
Default Configurations
Reboot with Customized
Configurations
Vigor300B Series User's Guide
Check the box to enable such profile.
Set the name for getting community by typing a proper
character. The default setting is public.
Set community by typing a proper name. The default setting
is private.
Type the IP address for the manager host.
Renew the web page.
Click this button to save the configuration and exit the web
page.
y s t e m
y s t e m
Description
Click it to reboot the router using the current
configuration. Then, click Reboot..
Click it to reset the router settings to default values. Then,
click Reboot.
Click it to reboot the router using the current configuration
(only the configuration settings listed and selected below). If
193