Table of Contents
Advertisement
Item
Profile
Enable This Profile
Start IP
End IP
DNS
Routers
Lease Time
Apply
Cancel
4.
When you finish the above settings, please click Apply to save the configuration and
exit the dialog.
5.
The LAN profile has been edited.
Description
Display the name of the LAN profile.
Check this box to enable this profile.
Set the starting IP address of the IP address pool for DHCP
server.
Set the ending IP address of the IP address pool for DHCP
server.
Set the private IP address for DNS server. If this field is
blank, users on LAN will treat Vigor300B as the DNS
server.
Add – Click it to add a new IP address for DNS server.
Save – Click it to save the setting.
– click the icon to remove the selected entry.
In general, this box will be blank. It means Vigor300B will
be regarded as the gateway for the user.
However, if you want to use other gateway, please assign the
IP address in this field.
Set a lease time for the DHCP server. The time unit is
minute.
Click it to save and exit the dialog.
Click it to exit the dialog without saving anything.
56
Vigor300B Series User's Guide
Advertisement
Table of Contents
