Apply
Cancel
If you choose DMZ (only available in wan4 profile) as IPv4 protocol type, click the
DMZ Tab to open the following page:
Available parameters are listed as follows if you choose NAT as DMZ Mode:
Item
DMZ Mode
IP Address
Subnet Mask
Apply
Vigor300B Series User's Guide
– Click the icon to remove the selected entry.
Click it to save the configuration and exit the dialog.
Click it to exit the dialog without saving the configuration.
Description
Choose NAT or Routing as DMZ mode.
Type the IP address specified for such profile.
Use the drop down list to choose the subnet mask for such
profile.
Click it to save the configuration and exit the dialog.
35