Setting - Draytek VigorPro 5510 Series User Manual

LAN ---
MAC Address
st
1 IP Address
st
1 Subnet Mask
DHCP Server
DNS
WAN1/WAN2 ---
Link Status
MAC Address
Connection
IP Address
Default Gateway
Wireless LAN ---
MAC Address
Frequency Domain
Firmware Version
SSID
3 . 1 6 . 2 T R - 0 6 9 S e
3 . 1 6 . 2 T R - 0 6 9 S e
Vigor router with TR-069 is available for matching with VigorACS server. Such page
provides VigorACS and CPE settings under TR-069 protocol. All the settings configured
here is for CPE to be controlled and managed with VigorACS server. Users need to type
URL, username and password for the VigorACS server that such device will be connected.
However URL, username and password under CPE client are fixed that users cannot change
The default CPE username and password are "vigor" and "password". You will
it.
need it when you configure VigorACS server.
Display the MAC address of the LAN Interface.
Display the IP address of the LAN interface.
Display the subnet mask address of the LAN interface.
Display the current status of DHCP server of the LAN
interface.
Display the assigned IP address of the primary DNS.
Display the connection status.
Display the MAC address of the WAN Interface.
Display the connection mode used currently.
Display the IP address of the WAN interface.
Display the assigned IP address of the default gateway.
Display the MAC address of the wireless LAN.
It can be Europe (13 usable channels), USA (11 usable
channels) etc. The available channels supported by the
wireless products in different countries are various.
Display information about equipped WLAN miniPCi
card. This also helps to provide availability of some
features that are bound with some WLAN miniPCi card.
Display the identification name for the WLAN.
t t i n g
t t i n g
224
VigorPro5510 Series User's Guide