Reboot System - Draytek VigorPro 5510 Series User Manual
Utm router with dual-wan interface
Hide thumbs
Also See for VigorPro 5510 Series:
- Quick start manual (56 pages) ,
- Declaration of conformity (1 page) ,
- User manual (218 pages)
Table of Contents
Advertisement
Set Community
Manager Host IP
Trap Community
Notification Host IP
Trap Timeout
3
.
1
6
.
8
R
e
b
o
o
3
.
1
6
.
8
R
e
b
o
o
The Web Configurator may be used to restart your router. Click Reboot System from
System Maintenance to open the following page.
If you want to reboot the router using the current configuration, check Using current
configuration and click OK. To reset the router settings to default values, check Using
factory default configuration and click Reboot Now. The router will take 5 seconds to
reboot the system.
In addition, you can enter the index of schedule profiles to reboot your system according to
the preconfigured schedules. When you finish the reboot time schedule, please click OK to
save it. For detailed configuration of time schedule, please refer to section Schedule.
VigorPro5510 Series User's Guide
Set community by typing a proper name. The default setting is
private.
Set one host as the manager to execute SNMP function.
Please type in IP address to specify certain host.
Set trap community by typing a proper name. The default
setting is public.
Set the IP address of the host that will receive the trap
community.
The default setting is 10 seconds.
t
S
y
s
t
e
m
t
S
y
s
t
e
m
233
Advertisement
Table of Contents
