Chrysler NAVIGATION User Manual page 99

Connect a 3.5 mm stereo mini-jack cable as shown above
(not provided with the radio) to the AUX connector on
the navigation radio and to the earphone connector of
your audio device.
The display will switch automatically to the AUX mode,
when a 3.5 mm stereo mini-jack cable has been connected.
The radio screen will revert back to the last tuner mode
when the cable is unplugged.
To change to AUX mode while the cable is connected to
the unit, press the MEDIA button until the AUX tab is
highlighted on the top of the screen.
Adjust the volume with the ON/OFF VOLUME knob, or
with the volume of the attached device.
The control of the external device (e.g., selecting playlists,
play, fast forward, etc.) cannot be provided by the radio;
use the device controls instead.
NAVIGATION 97