Chrysler NAVIGATION User Manual page 115

The following are general phone to UConnect System
voice pairing instructions:
1. Press the UConnect button to begin.
2. Wait for the beep.
3. Say PHONE PAIRING.
4. When prompted, after the beep, say PAIR A PHONE
and follow the audible prompts.
5. You will be asked to say a four-digit pin number
which you will later need to enter into your cellular. You
can enter any four-digit pin number. You will not need to
remember this pin number after the initial pairing pro-
cess.
6. The UConnect system will then prompt you to begin
the cellular phone pairing process on your cellular
phone. Before attempting to pair phone, please see your
cellular phone's user manual (Bluetooth section) for
instructions on how to complete this step.
7. For identification purposes, you will be prompted to
give the UConnect system a name for your cellular
phone. Each cellular phone that is paired should be given
a unique phone name.
8. You will then be asked to give your cellular phone a
priority level between 1 and 7, 1 being the highest
priority.
You can pair up to seven cellular phones to your
UConnect system. However, at any given time, only one
cellular phone can be in use, connected to your
UConnect System. The priority allows the UConnect
system to know which cellular phone to use if multiple
cellular phones are in the vehicle at the same time.
For example, if priority 3 and priority 5 phones are
present in the vehicle, the UConnect system will use the
priority 3 cellular phone when you make a call. You can
select to use a lower priority cellular phone at any time
(refer to "Advanced Phone Connectivity" section).
NAVIGATION 113