General Handling; User Interface Elements - Chrysler NAVIGATION User Manual

GENERAL HANDLING

User Interface Elements

Power to operate the navigation radio is supplied
through the ignition switch, which must be in the ON,
ACC or in ACC Delay mode in order to operate the
navigation radio.
(1) ON/OFF VOLUME knob It is also possible to set the
unit in standby mode during driving, by pressing the
ON/OFF VOLUME rotary knob.
NOTE: If the ignition is switched off with the radio in
standby mode, the radio memorizes the standby state
when the ignition is switched on again. Press the ON/
OFF VOLUME rotary knob to switch the radio on. The
navigation software is always working when the ignition
is switched on, even if the radio is in standby mode. It is
possible to eject the CD and to display the time if the unit
is switched off.
(2) CENTER CONTROL knob Rotate the CENTER
CONTROL knob to highlight menu items.
Move the joystick to change menu values or to move the
cursor on the screen. Press the joystick to select high-
lighted menu items.
NAVIGATION 9