Make A Second Call; Place / Retrieve A Call From Hold; Toggle Between Calls - Chrysler NAVIGATION User Manual

When another Call in Progress If a call is currently in
progress and you have another incoming call, you will
hear the same network tones for call waiting that you
normally hear when using your cell phone.
Press the UConnect button to place the current call on
hold and answer the incoming call.
NOTE: The UConnect system compatible phones in
market today do not support rejecting an incoming call
when another call is in progress. Therefore, the user can
only either answer an incoming call or ignore it.

Make a Second Call

While Another Call is in Progress:
1. To make a second call while you are currently in a call,
press the VR button.
2. Say DIAL or CALL followed by the phone number or
phonebook entry you wish to call.
3. The first call will be on hold while the second call is in
progress. To go back to the first call, refer to section
"Toggling Between Calls."
4. To combine two calls, refer to section "Conference
Call."

Place / Retrieve a Call from Hold

1. To put a call on hold, press the UConnect button until
you hear a single beep which will indicate that the call
has been placed on hold.
2. To bring the call back from hold, press and hold the
'Phone' button until you hear a single beep.

Toggle between Calls

If two calls are in progress (one active and one on hold),
press the UConnect button until you hear a single beep
indicating that the active and hold status of the two calls
have switched. Only one call can be placed on hold at one
time.
NAVIGATION 119