Conference Call; Three-Way Call; Call Termination; Redial - Chrysler NAVIGATION User Manual

120 NAVIGATION

Conference Call

When two calls are in progress (one active and one on
hold), press and hold the UConnect button until you
hear a double beep indicating that the two calls have
been joined into one conference call.

Three-Way Call

1. To initiate three-way calling, press the VR button
while a call is in progress.
2. Make a second phone call as described in section
"Making a Second Call while Current Call in Progress."
3. After the second call has established, press and hold
the UConnect button until you hear a double beep
indicating that the two calls have been joined into one
conference call.

Call Termination

1. To end a call in progress, momentarily press the
UConnect button.
Only the active call/s will be terminated and if there is a
call on hold, it will become the new active call.
2. If the active call is terminated by the far end, a call on
hold may not become active automatically. This is cell
phone dependent.
3. To bring the call back from hold, press and hold the
UConnect button until you hear a single beep

Redial

1. Press the UConnect button to begin.
2. Wait for the beep.
3. Say REDIAL.