Advertisement
2011 Chassis Cab PTO Operation & Installation Guide
PTO Installation Alternative
In addition to the current method of PTO installation from beneath the vehicle, an
alternative method has been developed that allows the installation from above by
removing the PTO patch panel in the floor. The instructions are as follows.
1. Remove the rear package tray located behind the seat from the vehicle.
2. Unbolt the seat and move it to the rear of the cabin where the package tray was
removed.
3. Remove the sill guards (rocker panel covers) passenger side to allow the vinyl
floor mat to be lifted. They are removed by prying straight up to disengage metal
clips.
4. Lift the floor mat and fold it rearward and toward the drivers side to expose the
patch panel
01/22/2010
-
-
+
+
ALL
ALL
IN
IN
OUT
OUT
Advertisement
