Glass Cleaning - Dimplex DFG2562 Owner's Manual

Maintenance
glass assembly. be aware that
some of the glass media may fall
out of the tray (Figure 8).
②
Empty the tray of glass media.
CAUTION: handle glass
media with care as some
pieces may have sharp edges.
Figure 8
Flicker rod
Glass media
and Tray
③
Lift the tray up and remove
from firebox.
④
Pull flicker rod towards the
motor and bend gently to remove
the opposite end from the support
bracket.
⑤
remove flicker rod from motor
(see Figure 8).
14
⑥
clockwise.
⑦
⑧
motor shaft and replace opposite
end of flicker rod back into
support bracket.
⑨
firebox.
⑩
spread the glass media.
⑪

glass Cleaning

The front glass is cleaned in
the factory during the assembly
Front Glass
operation. During shipment,
Assembly
installation, handling, etc., the
front glass may collect dust
particles, these can be removed
by dusting lightly with a clean dry
cloth.
To remove fingerprints or other
marks, the glass can be cleaned
with a damp cloth. The glass
should be completely dried with
a lint free cloth to prevent water
spots. To prevent scratching,
do not use abrasive cleaners or
unscrew bulb(s) counter
Insert new bulb(s).
Push flicker rod back onto
replace media tray back into
Gently pour and evenly
replace glass assembly.
www.dimplex.com