Maintenance - Dimplex DFG2562 Owner's Manual

Hide thumbs Also See for DFG2562:
Table of Contents

Advertisement

Operation
This will synchronize the remote
control and the remote control
receiver.
! NOTE: You will have only 10
seconds to perform this last
step. Failure to do so will result
in these steps needing to be
followed again.

Maintenance

 
WARNINg: Disconnect
power before attempting any
maintenance or cleaning to
reduce the risk of fire, electric
shock or damage to persons.
Light Bulb Replacement
Allow at least five (5) minutes for
light bulbs to cool before touching
bulbs to avoid accidental burning
of skin.
Light bulbs need to be replaced
when you notice a dark section
of the flame. There are two (2)
bulbs under the media tray, which
generate the flames.
Light Bulb Requirements
Quantity of two (2) clear
If you are still experiencing issues
with your remote control, contact
Dimplex North America Limited
Customer Service at
1-888-346-7539, or visit the
Dimplex website at
www.dimplex.com.
chandelier or candelabra bulbs
with an E-12 (small) socket base,
60 Watt rating. Example: GE
60bC or Philips 60 CTC.
Do not exceed 60 Watts per
bulb.
Helpful Hints
It is a good idea to replace both
light bulbs at one time if they are
close to the end of their rated life.
Group replacement will reduce
the number of times you need
to open the unit to replace light
bulbs. Care must be taken when
removing the media tray.
Replacing Light Bulbs:
Carefully remove the front
13

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dfg2562ssDfg253a

Table of Contents