Maintenance - Dimplex EWF-SS Service Manual

Hide thumbs Also See for EWF-SS:
Table of Contents

Advertisement

MAINTENANCE

WARNING: Disconnect power before attempting any
maintenance or cleaning to reduce the risk of fire, electric
shock or damage to persons.
Light Bulb Replacement
Allow at least five (5) minutes for light bulbs to cool before
touching bulbs to avoid accidental burning of skin.
Light bulbs need to be replaced when you notice a dark
section of the flame or when the clarity and detail of the log
exterior disappears. There are two (2) bulbs under the log
set which generate the flames and embers.
Helpful Hints: It is a good idea to replace all light bulbs
at one time if they are close to the end of their rated life.
Group replacement will reduce the number of times you
need to open the unit to replace light bulbs.
Light Bulb Requirements: Quantity of three (3) – 60 Watt
chandelier or candelabra bulbs with E-12 (small) socket
base, 120 Volt.
DO NOT ExCEED 60-WATTS PER BULB .
Bulb Replacement Instructions:
1.
Unplug the unit from the outlet.
2.
Remove glass assembly as shown in Figure 3.
3.
Reach in and turn the burnt-out bulb(s) (or all bulbs)
counter-clockwise to remove.
4.
Replace with new bulbs.
5.
Fit glass assembly back in place.
6.
Plug in the Sahara fireplace.
Glass Cleaning
The front glass is cleaned in the factory during the
assembly operation. During shipment, installation,
handling, etc., the front glass may collect dust particles,
these can be removed by dusting lightly with a clean dry
cloth.
To remove fingerprints or other marks, the glass can be
cleaned with a damp cloth. The glass should be completely
dried with a lint free cloth to prevent water spots. To
prevent scratching, do not use abrasive cleaners or spray
liquids on the glass surface.
Sahara Fireplace Surface Cleaning
To remove fingerprints or other marks, the exterior finish
can be cleaned with a damp cloth with a mild detergent.
The surface should be completely dried with a lint free cloth
to prevent water spots.
To prevent scratching, do not use abrasive cleaners or
spray liquids on any surface.
4
Figure 3
1
2
www.dimplex.com
3

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Rwf-dg

Table of Contents