Dimplex DS3311 Owner's Manual page 9

Figure 2
Light Bulbs (2)
Log Set
Screws (4)
Clear Door Panel Cleaning
The clear door is cleaned in the factory during the assembly operation.
During shipment, installation, handling, etc., the clear door may collect
dust particles, these can be removed by dusting lightly with a clean dry
cloth.
To remove fingerprints or other marks, the clear door can be cleaned
with a damp cloth. The clear door should be completely dried with a
lint free cloth to prevent water spots. To prevent scratching, do not use
abrasive cleaners or spray liquids on the clear door surface.
Compact Stove Surface Cleaning
Use warm water only to clean painted surfaces of the Compact Stove.
Do not use abrasive cleaners.
6