Dimplex DS4411 Owner's Manual page 8

position the unit is operated with the ON and OFF buttons of the
remote control.
When the switch is in the center position the unit is off.
B. Heater ON/OFF Switch
The Heater ON/OFF Switch supplies power to the heater fan and the
heater element. When the switch is in the ON position the heater
operates if the thermostat calls for heat.
C. Heater Thermostat Control
To adjust the temperature to your individual requirements, turn the
thermostat control clockwise all the way to turn on the heater. When
the room reaches the desired temperature, turn the thermostat knob
counter clockwise until you hear a click. Leave in this position to
maintain the room temperature at this setting. For additional heat, turn
clockwise until you hear the click again and the heater will turn on.
!
NOTE: When the heater is switched ON, the heater fan will
operate. The heater element may or may not be on, depending on
the thermostat control setting (see "Heater Thermostat Control").
Resetting The Temperature Cutoff Switch
The heater is protected with a safety device to prevent overheating.
Should the heater overheat, an automatic cut out will turn the heater
off and it will not come back on without being reset. It can be reset
by switching the ON/OFF Switch to OFF and waiting five (5) minutes
before switching the unit back on.
CAUTION: If you need to continuously reset the heater, unplug
the unit and call Dimplex North America Limited at 1-888-346-7539.
Remote Operation (Figure 3)
The stove is supplied with an integrated on/off remote control.
!
NOTE: Ensure that the stove's Main ON/OFF Switch is set to the
Remote setting (right position).
To operate, push the ON button to turn stove on, push the OFF button
5