Dimplex DS4411 Owner's Manual page 10

the flame or when the clarity and detail of the log exterior disappears.
There are two (2) bulbs located under the log set which generate the
flames and embers.
Helpful Hints
It is a good idea to replace all light bulbs at one time if they are close to
the end of their rated life. Group replacement will reduce the number
of times you need to open the unit to replace light bulbs.
Light Bulb Requirements
Quantity of two (2) clear chandelier or candelabra bulbs with an E-12
(small) socket base, 25 Watt rating.
Required tools: Phillips screw driver.
Replacement:
1. Remove the five screws
from the access panel,
located on the back of the
unit, and remove access
panel.
2. Locate and examine the
bulb to determine if
replacement is required.
3. Unscrew the bulb counter
clockwise.
4. Insert new bulbs.
5. Secure access panel to
unit.
Clear Door Panel Cleaning
The clear door is cleaned in the factory during the assembly operation.
During shipment, installation, handling, etc., the clear door may collect
dust particles. These can be removed by dusting lightly with a clean,
dry cloth.
To remove fingerprints or other marks, the clear doors can be cleaned
with a damp cloth. The clear door should be completely dried with a
Figure 4
Access Panel
7
Light
Bulbs (2)
Screws