DigiDesign Mbox 2 Micro Getting Started Manual page 47

To bounce audio to disk:
After you have finished editing and mixing a session
1
in Pro Tools, select the length of the session in the
Timeline (or on a track), plus an additional amount of
time to avoid cutting off any reverb tails that might
continue past the end of the last region. (See Figure 2 on
page 38.)
Choose File > Bounce to > Disk.
2
Choosing Bounce to Disk from the File menu
In the Bounce Options dialog, select Outputs 1–2 as
3
the Bounce Source.
Select BWF (.WAV) for the File Type.
4
Select Stereo Interleaved for the Format.
5
Select 16 for the Resolution and 44100 for the Sample
6
Rate.
If you are changing the sample rate of the bounced
7
file, select a Conversion Quality setting. (For details, see
the Pro Tools Reference Guide.)
Select "Convert after Bounce," and click Bounce.
8
Bounce options for creating CD burnable tracks
Chapter 7: Common Tasks with Pro Tools LE 39