DigiDesign Mbox 2 Micro Getting Started Manual page 18

Follow the on-screen instructions to proceed with in-
7
stallation.
Select the install location. For maximum reliability,
8
install Pro Tools on your startup drive.
Click Next.
9
Select the Pro Tools application for installation.
10
You can also select from a list of optional items to in-
11
stall along with Pro Tools.
DigiTranslator DigiTranslator™ is a software option for
Pro Tools that lets you convert and exchange OMF and
AAF sequences and MXF files directly in the Pro Tools
application. This option is purchased separately.
Command|8 Controller and Driver The Command|8
Driver is required if you are using the Digidesign Com-
mand|8 control surface.
MP3 Export Option The MP3 Export Option lets you ex-
port MP3 files from Pro Tools. This option is purchased
separately.
The Pro Tools Installer disc includes additional
software for your system. For more information,
see "Additional Software on the Pro Tools In-
staller Disc" on page 11.
Click Next.
12
10 Mbox 2 Micro Getting Started Guide
Click Install.
13
On Windows XP, several messages are dis-
played during installation that can be ignored,
including multiple "Found New Hardware" di-
alogs and "A Problem Occurred During Hard-
ware Installation."
Additionally, if you get a warning dialog about
the driver not passing Windows Logo testing,
click Continue Anyway.
On Windows Vista, if you get a warning dialog
about the driver, click "Install this Driver Any-
way!"
Wait for the installer to finish installing all software
14
components, drivers, and PACE System files before pro-
ceeding to the next step.
When installation is complete, click Finish.
15
The USB LED on the Mbox 2 Micro illuminates green
when it is receiving power and ready for use.
If the USB LED on the Mbox 2 Micro does not il-
luminate after installation, or it is blinking, try
unplugging it from your computer and plugging
it back in. If the USB LED still does not illumi-
nate, shut down the computer, disconnect the
Mbox 2 Micro and start the computer. Once the
computer has fully restarted, reconnect the
Mbox 2 Micro.
If an incorrect output is selected in Pro Tools,
the USB LED on the Mbox 2 Micro flashes am-
ber.