Front Seats - Volvo V70 Owner's Manual

2002 VOLVO V70
WARNING!
Because the driver's seat can be adjusted with the ignition off, children should never be left
unattended in the car.
Movement of the seat can be STOPPED at any time by pressing any button on the power seat
control panel.
Do not adjust the seat while driving. The seat should be adjusted so that the brake pedal can be
depressed fully. In addition, position the seat as far rearward as comfort and control allow.
The seat rails on the floor must not be obstructed in any way when the seat is in motion.
Three seat positions can be programmed. To program a seat position:
1 Adjust the seat to the desired position.
2 Hold down the MEM button.
3 While holding down the MEM button, press button 1 to program the current position of the seat.
Buttons 2 and 3 can be programmed in the same way. To move the seat to a programmed position, press
and hold down button 1, 2 or 3 until the seat moves to the preset position and stops.
As a safety precaution, the seat will stop automatically if the button is released before the seat has
reached the programmed position.
NOTE: The seat has an overload protector which engages if an object blocks the movement of the seat.
If this happens, remove the object and wait 20 seconds before operating the seat again.
* Only the driver's seat is equipped with the memory function.
pg. 53 Front seats
Electrically operated seats - general information
file:///K|/ownersdocs/2002/2002_V70/02v70_04a.htm (3 of 12)12/30/2006 3:59:01 PM