Volvo V70 Owner's Manual page 80

NOTE
Main beam can only be activated in position
.
Main beam flash
Move the stalk switch gently towards the steer-
ing wheel to the position for main beam flash.
Main beam comes on until the stalk switch is
released.
Dipped beam
When the engine is started, dipped beam is
activated automatically* if the headlamp con-
2
trol is in position . If necessary, auto-
matic dipped beam for this position can be
deactivated by a workshop. Volvo recom-
mends that you contact an authorised Volvo
workshop.
In position dipped beam is always acti-
vated automatically when the engine is running
or when the remote control key is in position
II.
Main beam
Main beam can only be activated when the
headlamp control is in position
vate/deactivate main beam by moving the stalk
2 For certain markets dipped beam is deactivated in this position.
switch towards the steering wheel to the end
position and release.
When main beam has been activated the sym-
bol illuminates in the combined instru-
ment panel.
Active Bending Lights (ABL)*
Headlamp pattern with function deactivated (left)
and activated (right) respectively.
If the car is equipped with active headlamps
Active Bending Lights the light from the head-
lamps follows the steering wheel movement in
order to provide maximum lighting in bends
and junctions and so provide increased safety.
. Acti-
03 Your driving environment
The function is activated automatically when
the car is started. In the event of a fault in the
function the symbol illuminates in the
combined instrument panel at the same time
as the information display shows an explana-
tory text and a further illuminated symbol.
Symbol Display
Headlamp
failure
Service
required
The function is only active in twilight or dark-
ness and only when the car is moving.
*
Option/accessory, for more information, see Introduction.
Lighting
03
Specifica-
tion
The system
is disen-
gaged. Visit
a workshop
if the mes-
sage
remains.
Volvo rec-
ommends
that you
contact an
authorised
Volvo work-
shop.
79