Key Positions - Volvo V70 Owner's Manual

Insert and remove the remote control
key
Ignition switch with inserted remote control key.
NOTE
For cars with keyless function*, see
page 48.
Insert the key
The remote control key, with its symbols cor-
rectly turned, is fitted in the ignition switch.
After a gentle press on the key it is drawn into
the lock.
IMPORTANT
Foreign objects in the ignition switch may
jeopardise the function or destroy the lock.
Do not press the remote control key incor-
rectly turned - Hold the end with the detach-
able key blade, see page 44.
Withdraw the key
The remote control key is ejected after a gentle
press on it. (Automatic gearbox* must be in
position P.)
Functions
The remote control key's 3 different key posi-
tions can be reached without the need to start
the engine. The table shows the functions
available in each key position.
NOTE
To reach key position I or II without starting
the engine - do not depress the brake/
clutch pedal when the following operations
are carried out.
Key position 0
Insert the remote control key in the ignition
switch and gently press it - The key is drawn
into the lock.
03 Your driving environment
Key position I
With the remote control key inserted into the
ignition switch - Briefly press on START/STOP
ENGINE.
Key position II
With the remote control key inserted into the
ignition switch - Press on START/STOP
ENGINE for about 2 seconds.
Back to key position 0
To return to key position 0 from position I or II
- Briefly press on START/STOP ENGINE.
*
Option/accessory, for more information, see Introduction.

Key positions

03
71