Exhaust Gas; Exhaust Silencer - Viessmann ESS CHP Overview

4

Exhaust gas

4 Exhaust gas

4.1 Exhaust silencer

Article number
Function
Version
Installation
Delivery
Note
Subject to changes due to technical improvements
16
CHP module type
EM-18/36
EM-50/81, EM-70/115, BM-36/66, BM-55/88
EM-140/207, BM-98/150, BM-123/177
EM-199/263, EM-199/293, EM-238/363, BM-190/238
EM-363/498, EM-401/549, BM-366/437
2 pce in set
EM-199/263, EM-199/293, EM-238/363, BM-190/238
EM-363/498, EM-401/549, BM-366/437
Reduction of low frequency combustion noise in the exhaust
Reflection absorption exhaust silencer for integration in the exhaust pipe immediately downstream of the
CHP module, comprising:
• Cylindrical, pressure-tested and gas-tight steel casing, with integral reinforcement profiles
• Reflection part on the inlet side and permanently fixed special circular silencing link, matched to the
low frequency combustion noise emissions of the gas engine, segregated with bulkhead panels, lined
with moisture-stabilised stainless steel needle felt and covered with 2 mm thick special perforated
plate.
• Connectors on the inlet and outlet sides
• Drain connection in the reflection floor
• Horizontal or vertical installation
• The condensate connector must be located at the lowest point to ensure correct draining of the
condensate.
• Delivery not unloaded, insulated
• As loose accessories for on-site installation
• Ensure correct structure-borne noise insulation through suitable installation clamps!
• Internal primary silencers integrated in modules EM-50/81, EM-70/115, EM-140/207.
• Upstream of the stainless steel silencer, there must not be any black pipe in mild steel installed in the
flow direction. The warranty will otherwise become void!
ESS Viessmann
710-00-0065 7439253
710-00-0066 7439254
710-00-0067 7439255
710-00-0068 7439256
710-00-0069 7439257
710-00-0070 7439258
710-00-0071 7439259
ESS Energie Systeme & Service GmbH
CHP accessory range – 01/2010