Select Cycle - Amana NAV-1 Use And Care Manual

STEP 3

Select Cycle

To select a cycle, push the control dial in (off position)
and turn it to the right (clockwise) until the pointer is at
the soil level needed for the wash load in the Regular,
Handwash or No Iron Fabrics cycles.
Regular Cycle
Provides normal agitation and normal spin speeds to
wash cottons and heavily soiled items. For maximum
cleaning, set the dial at Extra Heavy.
No Iron Fabrics Cycle
Provides normal agitation and normal spin speeds with
a spray rinse to reduce wrinkling.
Handwash Cycle
Provides intermittent agitation and soak for delicates
and knits.
Control features vary by model.
STEP 4
Pull Control Dial Out to Start
You may stop the washer at any time by simply
pushing the control dial in. Therefore it is possible to
obtain a non-agitated soak or to shorten, skip or
repeat any part of a cycle. The control dial must be
pushed in (off position) when you change the setting.
Note:
Do not attempt to turn the control dial
counterclockwise. Damage to the timer will result.
6