Vertu Ascent Ti Reference Manual page 45

Packet data connection
To define when a GPRS connection is established:
1. From the stand-by display, press
»
C o n n e c t ivi t y P ack e t d a t a
2. Scroll to one of the following options and then press
Wh en nee ded registers and establishes an (E)GPRS connection
when an application using (E)GPRS needs it and closes the
connection when the application finishes
sets your Vertu phone to automatically register to
A l w a y s o n l i n e
an (E)GPRS network when you switch on your Vertu phone. The
icon will appear to indicate that GPRS or EGPRS service is available
If you receive a call or a text message, or make a call during a GPRS
or EGPRS connection, the
GPRS or EGPRS connection is suspended.
Packet data settings
You can connect your Vertu phone to a compatible PC using
Bluetooth wireless technology or a USB data cable connection.
This allows you to use your Vertu phone as a modem to enable
(E)GPRS connectivity from your PC.
To define the settings for (E)GPRS connections from your PC:
1. From the stand-by display, press
»
C o n n e c t ivi t y P ack e t d a t a
A c t i v e a c c e s s p o int
2. Scroll to the required access point and press
3. Scroll to
E d it a c t i v e a c c e s s p t .
4. With
A l ia s f o r a c c e s s p o i n t
5. Use the keys to enter an alias for the active access point
N U M B E R
and then press .
O K
You can also set the (E)GPRS dial-up service settings
(access point name) on your PC using the One Touch
Access application in Vertu PC Suite.
D a t a t ra n sf e r
Synchronise your calendar, contacts data, and notes with another
compatible device, for example a compatible PC, or a remote
Internet server (network service).
Your Vertu phone allows data transfer with a compatible PC or
another compatible device when using the phone without a SIM
card. Note that when you use the phone without a SIM card, some
functions appear dimmed in the menus and cannot be used.
Synchronising with a remote Internet server is not possible without
a SIM card.
» »
M enu S e t t i n g s
»
P a ck e t d a t a c o n n .
S ele c t
icon will appear to indicate that the
» »
M enu S e t t i n g s
»
P a ck e t d a t a s e t t i n g s
.
A c t i v a t e
and then press
S e l e c t
highlighted, press
S e l e c t
Partner list
To copy or synchronise data from your Vertu phone, the name of the
device and the settings must be in the list of partners in transfer
contacts. If you receive data from another device, the partner is
.
automatically added to the list, using the contact data from the other
.
device.
items in the list.
To add a new partner to the list (for example a new device):
1. From the stand-by display, press
C o n n e c t i v i t y
c o n t a c t
2. Mark the required settings according to the transfer type.
To edit the copy and synchronise settings:
1. Scroll to the required entry in the partner list and press
E d it
2. Modify the settings accordingly.
To delete a partner from the list:
1. Scroll to the required entry in the partner list and press
D e l e t e
2. Confirm the
»
Data transfer with a compatible device
.
Bluetooth wireless technology can be used for synchronisation. The
.
other device should be in the stand-by mode.
.
To start data transfer:
1. From the stand-by display, press
C o n n e c t i v i t y
2. Scroll to the required entry in the Partner list (other than
s y n c
According to the settings, the selected data is copied or
synchronised. The other device also must be activated for receiving
data.
Synchronise from a compatible PC
Before you synchronise data from calendar, notes, and contacts
with a PC, you must install the Vertu PC Suite software on a
compatible PC. Use Bluetooth wireless technology, or a USB data
cable for the synchronisation, and start the synchronisation from the
PC.
English
44
Server sy nc and P C s y n ch ro n i sa t i o n
M enu
»
D a t a t ra n s f e r
» »
P h o n e c o p y D a t a t o b e c o p i e d
.
.
D e l e t e t r a n s f e r c o n t a c t ? % U
You cannot delete Server synchronisation or PC
synchronisation.
M enu
»
D a t a t ra n s f e r
or P C s y n ch ro n is a t io n
SETTINGS
are the original
» »
Se ttin g s
» »
O p t io n s A d d t r a n s f e r
.
O p t io n s
O p t io n s
message.
» »
Se ttin g s
.
Serv er
) and then press S e l e c t .
»
»