Inserting The Battery And Sim Card - Vertu Ascent Ti Reference Manual

Hide thumbs Also See for Ascent Ti:
Table of Contents

Advertisement

Inserting the battery and SIM card

The SIM card and its contacts are easily damaged.
Be careful when handling, inserting or removing the SIM card.
Keep SIM cards and the back cover release key out of
the reach of small children.
Always switch the phone off and disconnect the
charger before removing the battery.
R e m o v i n g t h e b a ck c o v e r
01
02
I n se rt in g t h e S I M c a rd
03
04
I n se rt in g t h e b a tt e r y
05
With the back of your
Vertu phone facing you,
position the back cover
release key (01) into the
slot of the locking screw
(02).
Turn the locking screw
(02) a quarter of a turn
anticlockwise, and gently
lift off the back cover as
shown.
Insert the SIM card into
the SIM card
compartment, ensuring
that the bevelled corner
(03) is located bottom
right and the gold contact
area is facing downwards.
Slide the locking
mechanism (04) over the
SIM card to hold it in
place.
Position the battery so
that the contacts align
with the contacts in the
battery compartment (05).
Ensure that the battery
and SIM card are seated
correctly before replacing
the back cover.
English
R e p l a c i n g t h e b a ck c o v e r
D i s p l a y i c o n s a n d i n d i c a t o r s
The display shows the current status of your Vertu phone.
Status icons are displayed below the battery charge and signal
strength indicators. The most commonly displayed icons are:
You have received one or more text messages.
You have missed a call.
You have a voice message waiting (may not be shown on all
networks).
The
profile is selected. Alternative icons are displayed
F li g h t
for other profiles.
Audible alerts are disabled. There is no ringing tone when
you receive a call.
The keypad is locked.
An alarm is set.
3
To replace the back
cover, locate the internal
06
clip (06) first.
Lower the back cover into
position until it clicks into
place. The cover should
close tightly using only
light pressure.
The GSM signal strength indicator appears
at the top left of the display. If you are using a
3G connection you will see the 3G signal
strength indicator.
This picture shows a strong signal.
This picture shows that the signal strength is
weak. To obtain a stronger signal move to an
area clear of obstructions that may block the
signal.
The battery charge indicator appears at the
top right of the display.
This picture shows a fully charged battery.
This picture shows that the battery charge
level is low and you need to recharge your
Vertu phone soon.
GETTING STARTED

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents