Appendix B: Summary Of Special Remote Codes - Velodyne DIGITAL DRIVE SERIES User Manual

APPENdIX B: SUMMARy OF SPECIAL REMOTE COdES

Following are special remote codes and their functions. Unless otherwise noted, the codes are active only on
the cover page.
Function
Self-EQ
Restore defaults
Switch to PAL/SECAM video
Display serial number
Restore last saved volume
Show internal test parameters
www.velodyne.com
Code
3-2-1
8-9-0
DOWN ARROW 4 times followed by RESET
UP ARROW 4 times then SELECT
RESET
TEST (3 times)
description
Initiates Self-EQ feature. Be sure to connect the microphone
before engaging. Press RESET to cancel prematurely.
After 25 sweeps, the unit saves and resets.
Restores defaults and resets the subwoofer.
The unit restarts in PAL/SECAM video mode.
TO restore NTSC mode, restore defaults.
Shows the serial number of the unit at the top of the screen.
If volume is changed, restores last saved volume.
Displays several internal software variables, including
ACCGAINH, which is a measure of servo functioning.
Press TEST again to hide.
Digital Drive Series User's Manual - 45