Remote Control - Velodyne DIGITAL DRIVE SERIES User Manual

- Theater/music selection indicator (servo gain control)
- Signal sensing auto turn on/off/12 Volt trigger (defeatable)
- 6 presets for customized listening modes and eQ defeat
- Selectable default preset
- Switchable Velodyne logo indicator
- night mode maximum volume setting
- Save settings indicator
- daisy chain feature

REMOTE CONTROL

The Velodyne digital drive infrared remote control allows you to set up, adjust, and reset your subwoofer when
connected to a television or a video monitor. you will also use your remote to activate preset listening values,
set the subwoofer's volume up or down, mute the subwoofer, or set a night operational mode.
Take care not to lose or misplace your remote control as adjustments to the subwoofer (with the exception of
volume control) can only be done using the remote.
NOTE: Two 1.5V AA batteries are required and included for operation of the remote control.
external IR receivers may be ordered from either Velodyne or your local Velodyne audio equipment dealer.
www.velodyne.com
Digital Drive Series User's Manual - 3