Advertisement
Retrieving the updated dynadock™ drivers – Windows Vista
Go to www.dynadock.com to download the latest dynadock™ driver version 2.3
1. Click on the download icon.
2. Save the dynadock_2.3 file to your computer under the Desktop folder.
It will take several minutes to download the file.
3. Click "Open Folder"
4. Double click on the "dynadock_2.3" file
5. Click RUN
6. WinZip Self-Extractor will open, click OK.
7. Click UNZIP > OK
8. Minimize the Desktop folder. The dynadock™ install menu will appear.
NOTE: The install program will uninstall the existing dynadock drivers:
•
Dynadock™ Utility
•
TOSHIBA USB Audio
•
TOSHIBA Video Dock
•
DisplayLink Core Software
9. Click on "Install dynadock™ Utility & Driver"
10. The "Uninstall option menu" will pop up
11. Click OK. This will start to uninstall the old drivers.
12. Select "Remove dynadock™ Utility" and click Finish
13. Click "Close" to exit.
The TOSHIBA USB Audio Uninstallation screen will open.
14. Click OK to Start to uninstall TOSHIBA Audio driver
15. Re-start your computer.
NOTE: After re-starting your computer, Windows Installer will prompt you to uninstall the products.
Click "Yes" to uninstall the remaining TOSHIBA Video Dock and DisplayLink Core Software drivers.
16. Re-start your computer
Installing the new drivers
Run the dynadock™ install program again
1. Double click on the "dynadock_2.3" file from your Desktop
2. WinZip Self-Extractor will open, click OK.
3. Click UNZIP > OK
4. The dynadock™ install menu will appear.
5. Open "dynadock_2.3" folder on your desktop
6. Click on "Install dynadock™ Utility & Driver"
7. Follow instructions on the screen
8. Re-connect the dynadock™ when the program stated "Please Plug in TOSHIBA USB Audio.
9. You will be asked to register for new dynadock™ updates. Click OK to skip. You can always visit
dynadock.com for updates.
10. Re-start your computer.
Advertisement
