Table of Contents
Advertisement
Basic Recording/Playback
Mixdown
After tailoring sound of all the tracks, let's make a master tape (disc) using your master recorder (cassette, DAT,
MD, etc.). As the VF80 can feed the stereo outputs (L and R) via the S/PDIF (coaxial) digital output jack, you can
make the master tape (disc) in digital domain if your recorder provides a digital input jack. If your digital re-
corder only provides the optical input jack, use the Fostex COP-1 optical to coaxial converter.
<Using the mastering mode/internal mastering mode:>
The VF80 provides the "mastering mode" and "internal
mastering mode".
In the mastering mode, you can record a material mixed
down to track 7 and 8 to an external master recorder,
while applying sound processing. The mastering mode
allows you to perform advanced mastering.
See "Advanced Operations" on page 76 for details about the
mastering mode.
In the internal mastering mode, you can create a master song
inside the VF80, without the need of using an external
master recorder. Also, you can create an audio CD from
master materials mastered in the mastering mode. (Note
that you need the optional CD-RW drive to create an audio
CD.)
See "Advanced Operations" on page 79 for details about the
internal mastering mode, and "Save/load of song data" on
page 115 for details about creating an audio CD.
Analog mixdown
Analog master recorder
INPUT A
ST OUT
INPUT B
PHONES
L
R
BAL
BAL
TRACK
EDIT
GUITAR
GUITAR
PGM
PAN
LINE
MIC
LINE
MIC
MIN
MAX
UNBAL
TRIM
UNBAL
TRIM
CH ON/OFF
CH ON/OFF
BOUNCE
MASTERING
PEAK
PEAK
REC EFF
Connect the [ST OUT - L/R] jacks to the input jacks of
1
your analog master recorder.
2
Set the recording level of the master recorder.
Start recording the master recorder, and start playback
3
of the VF80 from the beginning of the song.
When recording finishes, stop both the units.
4
<Fade in/out:>
You can fade in or fade out a song by using the [MASTER]
fader.
FOOT SW
MIX PARAMETER
SCENE
SCENE SEQ.
DIGITAL MULTITRACKER
FADER
MAP
EQ
EFFECT
ON/OFF
ACCESS
2TRK MODE
TRAINING
PHANTOM
F1
F2
F3
Digital mixdown
POWER
Digital master recorder
Connect the [DATA OUTPUT] jack to the digital input
1
jack of your master recorder.
Set the master recorder's recording source to the digi-
2
tal input.
• The sampling frequency of the VF80 is fixed to 44.1
kHz, so you cannot record the VF80 digital output
signal to the master recorder that cannot accept 44.1
kHz digital signals.
• In general, you cannot adjust the digital input level
of a digital recorder.
Adjust the stereo output level of the VF80 using the
3
[MASTER] fader.
• In general, set the fader so that the level meter on the
master recorder indicates "0" when the VF80 feeds
the loudest level signal.
If the level is too high, the sound may be distorted.
Start recording the master recorder, and start playback
4
of the VF80 from the beginning of the song.
When recording finishes, stop both the units.
5
38
S/P DIF / DATA
PHANTOM
MIDI
INPUT
ON
OFF
OUTPUT
INPUT
OUTPUT
Advertisement
Table of Contents
