Finalizer D.c. Algorithm - TC Electronic UNIT•Y Manual

FINALIZER D.C.
Multi-band compression is now available integrated into an 02R by running a high
performance TC Finalizer software module on your UNIT•Y card. Please note, that the
Finalizer module is optional. Read pages 4-5 to learn more about licenses, options etc.
If you have acquired the Finalizer D.C., you've got access to factory presets 50-59. Any of
the presets recall the algorithm. Of course you may store Finalizer D.C. user presets in a
RAM location. RAM locations 200 and upwards should be a first choice, but if you need
more preset space, the 100-200 area may also be used. However, future software options
may eat that area, thus erasing presets you haven't stored via MIDI.
Finalizer D.C. Routing
When the Finalizer algorithm is recalled, the Engine input configuration is switched from
mono to stereo. Inputs may be derived from Slot Output 5.6 or 7.8 and would typically be
Main L.R, Bus 5.6, Bus 7.8 or Main L.R Insert. Auxes or Direct outs can also be used.
Finalizer output signals either return to the 02R or output directly on UNIT•Y cards
containing DIO option. Typical I/O applications would be a Finalizer D.C. insert on the Main
L.R bus with the 02R master fader behaving normally, or to use the Finalizer Engine fader
as the master fader with the Main L.R signal being output directly from the card. The output
resolution is 24 bit.
Finalizer Routing
Slot Sends
5, 6, 7 & 8
Finalizer D.C. Routing
ENG 1
FINALIZER
Eng 1
Fader
ENG 2
(OPT)
Eng 2
Fader
Main L/R Insert Return
External Outputs
5.6 & 7.8
Stereo Fader 21/22
27
I/O Option
Mono
Stereo