Extended Routing; Returns; Returns Extended Routing - TC Electronic UNIT•Y Manual

RETURNS

Extended routing may be applied to a UNIT•Y card in slot 3 or slot 4 by pressing the EXT
RT button on the Main screen. Information about Extended Routing is kept with each 02R
Scene Memory, but generally the mode should only be set in the beginning of a mix, and
not when the card is passing audio.
A Main screen display for a UNIT•Y card with DIO extension board is shown below.
Return "St LR": The signal is routed directly to the Main L/R Stereo Bus.
Return "21.22": The signal is routed to the channel 21/22.
Return "OUT 5.6", "OUT 7.8": The signal is sent to the outputs of the card.
Enable Extended Routing
by pressing this button
Main screen. Extended Routing, card with DIO extension.
Enable Extended Routing
by pressing this button
Main screen. Extended Routing, no DIO.

EXTENDED ROUTING

13
When Extended Routing is
enabled, additional routing
options become available.
Note different routing options