Startup & Shutdown; Starting Up The Dp-01; Figure 1.1: Power Connections To The Dp-01 - Tascam DP-01 Owner's Manual

Startup & shutdown
Read this section to understand how to power up and power down the DP-01.

Starting up the DP-01

With the DP-01's rear panel power switch OFF, connect the power adapter to
the DP-01, the power cable to the power adapter, and the power cable to the
power supply.

Figure 1.1: Power connections to the DP-01

...
Switch on the DP-01 using the rear panel switch.
...
The DP-01 display shows a welcome message.
The system is loaded, and the last saved song is then loaded. The
indicator lights to show the hard disk is in use while the song
ACCESS
is being loaded, and the display shows the current operation.
...
When the light goes off, the display shows the "home screen":
ACCESS
A B S
T A S C A M
D P - 0 1
0 0 : 0 0 : 0 0 : 0 0
Starting out with your DP-01
off, we suggest that you turn
down the volume of any speakers
or amplifiers connected to the
unit. Also, do not wear head-
phones connected to the DP-01
when switching power on or off.
This will avoid damage to speak-
ers, etc. and possible damage to
your hearing.
operations by repeated presses of
the
EXIT
TASCAM DP-01 Owner's Manual
When switching
the DP-01 on and
You can reach this
screen from most
key.
9