Chapter 5 - Essential Moves; Back Up And Shutdown; Backing Up; From The Vga Screen - Tascam SX-1 Quick Start Manual

Back Up and Shutdown

Proper shutdown and regular backup of your SX-1 is
extremely important. Failure to shut down your SX-1
correctly before powering off can increase the possi-
bility of corrupted data in your saved files. Without
regular backup, the possibility that an unforeseen

Backing Up

There are many different ways of backing up, using
different types of media (for more on this subject, see
the Owner's Manual ). However, one of the simplest
and most convenient ways to back up is to use the

From the VGA screen

From the
1
MAIN DISPLAY MODES
the SX-1's front panel, press
Press the icon to the right of the
2
display to eject the CD-RW drive
Volume
drawer. Insert a blank CD-R or CD-RW and
press the drawer's close button.
From the list on the left side of the screen,
3
select a project. The name of the project
should appear in the
the two lists.
section on
, and
PROJECT
Backup
text box between
Name
Chapter 5 – Essential Moves
problem could wipe out some, or all, of your data
increases drastically. When it comes to your hard
work, don't take any chances; always perform a
proper shut down and backup of your projects after
each session.
SX-1's onboard CD-R burner. Follow the steps below
to find out just how easy it is.
TIP
HOT TIP! —
We recommend using TEAC brand CD recordable media
for all your CD-R needs.
then select the
Backup Projects
ing page will appear.
Press the button. The SX-1 will
4
BACKUP->
begin preparing the data for backup, and
then burn the disc when it is ready.
Wait until the SX-1 has finished burning the
5
disc, at which time it will be ejected.
That's it! You have successfully created a
6
backup of your current project.
TASCAM SX-1 Quick Start Guide
tab. The follow-
23