In And Out Marks - Tascam DP-01 Owner's Manual

Location
To move to a location mark
briefly press and release the
or next mark in the song. This works while playing back, while
stopped or "winding", but not while recording.
Alternatively, press and hold the
show the location mark list:
A B S
- -
M 0 0 1 .
M 0 0 3 :
Use the wheel to choose a mark (they're listed in the order they appear
in the song) and press
To delete a location mark
the mark you want to delete (or a little after). Press and hold down the
key and press the
SHIFT
To edit a location mark
location mark, you can change the time of the mark.
1
Press and hold the
LOCATE
tion mark list.
2
Use the wheel to select a mark and press the y cursor key to select it.
- - -
3
Use the wheel to "slip" the mark backwards and forwards by 1/10
frame (the rightmost digit of the number). You can't move a mark for-
ward past the next mark in the list, or backwards to before the previous
mark in the list.
4
Press when done (to return to the home screen) or
ENTER
return to the mark list).

IN and OUT marks

These marks are used for setting the points at which automated punch record-
ing starts and ends and for repeat playback, as well as for track editing. You can
set these marks while playing back, recording, or while playback is stopped.
...
Set IN and OUT marks by pressing and holding the
pressing ( ) or
IN SET IN
...
Locate to the IN and OUT points by simply pressing
...
Fine-tune the position of the IN and OUT points by pressing and
holding and pressing
SHIFT
- -
I N
O U T
T O
...
Edit the point, to 1/10 frame accuracy, using the cursor keys and the
wheel, in the same way as for direct location ("Direct location" on
page 25).
...
Press when done.
ENTER
26
TASCAM DP-01 Owner's Manual
Press and hold the
or key to move to the previous
REW F FWD
key for about a second to
LOCATE
0 0 : 0 2 : 5 9 : 2 0
L O C A T E L I S T
0 0 m 3 4 s 2 2
0 0 m 4 8 s 0 3
to jump to that mark.
ENTER
Stop playback (or recording) and locate to
( ) key.
INSERT DELETE
If you made a mistake when you entered a
key for about a second to show the loca-
T r i m M 0 0 1 - - -
0 0 m 3 4 s 2 2 f 0
( ) at the appropriate points.
OUT SET OUT
(
TRACK EDIT POINT EDIT
P O I N T E D I T - -
.
P O I N T
P O I N T :
P O I N T :
key, and
LOCATE
-
(to
EXIT
key and
SHIFT
and .
IN OUT
):
You can't undo
this.
This is sometimes
called "trimming".
The marks
shown in the or-
der they appear in the song, not
by number.
1/10 frame is 1/300
of a second—
about 3.3 milliseconds
IN and OUT marks
are also
(along with the TO mark, which is
set and used in the same way)
when performing track editing
functions.
are
used