Front; Rear - Tascam CD-GT2 Owner's Manual

IMPORTANT SAFETY INSTRUCTIONS

Front

OPEN switch
p
Slide this switch away from the
control panel and insert and remove discs.
(stereo minijack)
a PHONES jack
Connect headphones to this jack to output the CD
playback signal and the input signal from the
jack.
IN
(stereo minijack)
s LINE OUT jack
Outputs the CD playback signal and input signal from the
jack. Connect an audio system, speakers
GUITAR/MIC IN
with built-in amplifiers or similar equipment.
INPUT dial
d
Adjusts the input level of the
Names and functions of parts
jack to open the
PHONES
GUITAR/MIC
jack signal.
GUITAR/MIC IN
(standard phone jack)
GUITAR/MIC IN jack
f
Connect an electric guitar or microphone.
(standard phone jack)
g FOOT SW jack
Connect a TASCAM RC-30P or other momentary
footswitch (non-latching). Set the footswitch function on
the
SETUP & MISC.

Rear

DC IN 5V jack
h
Connect a TASCAM PS-P520 AC adapter (sold
separately).
j POWER switch
Turn the power ON and OFF. Press and hold the switch for
more than one second to turn the power ON and OFF.
screen.
1
TASCAM CD-GT2