Making Various Settings; Mono.monitoring; Splitting.the.cd.and.guitar.sounds - Tascam CD-GT2 Owner's Manual

IMPORTANT SAFETY PRECAUTIONS

Making various settings

You can change various settings to optimize the device for
your use environment and other requirements. All of the
following items are on the
Press the key to open the
MISC.
Use the ( , ) keys to select the desired item and
CURSOR
§ ¶
the keys to set the value.
VALUE (+, –)
Mono monitoring
You can output a mono signal from the
jacks.
OUT

TASCAM CD-GT2
screen.
SETUP & MISC.
screen.
SETUP & MISC.
and
PHONES
Select one of the following
ordinary stereo monitoring (default setting)
OFF
both channel signals are mixed and output in mono
L+R
left channel signal is output on both channels
L
right channel signal is output on both channels
R
Splitting the CD and guitar sounds
You can split the CD playback signal and guitar (or mic) signal
output through the
LINE the CD is on the left and only the guitar is on the right.
Turn the
SPLIT CD/GUITAR
playback signal to the L channel in mono and the
signal to the R channel.
MIC IN
MONO MONITOR
and jacks so that only
PHONES LINE OUT
setting ON to output the CD
settings.
GUITAR/