Advertisement
Description
- Microphone Stand With Counter Weight Boom
- Adjustable Height: 45" – 64" (1140mm - 1620mm)
- Foldable design
- Included counter weight adds balance when microphones are positioned
Included items
This product includes the following components. Open the package carefully to prevent damage to the main unit. Keep the box and other packing materials for transport in the future. If any of the included parts are missing or appear to have been damaged during shipping, please contact TASCAM.
- TM-AM3 x 1 p
- Thread Adapter (5/8" Female to 3/8" Male) x 1
- Owner's manual (this manual)
including warranty x 1
Cleaning the unit
Use a soft dry cloth to wipe the unit clean. Do not use chemicallytreated cleaning cloths, thinner, alcohol or similar substances to wipe the unit. Doing so could damage the surface or cause discoloration.
Using the TEAC Global Site
You can download this Owner's Manual and the Reference Manual necessary for this unit from the TEAC Global Site (http://teacglobal.com/).
In the TASCAM Downloads section, select the desired language to open the Downloads website page for that language.
Product registration
Customers in the USA, please visit the following TASCAM website to register your TASCAM product online.
http://tascam.com/
Names and function of parts
- Boom length adjustment screw
- Boom position adjustment screw
- Counterweight attachment screw
- Counterweight
- Boom angle adjustment screw
- Height adjustment screw
- Safety stopper
- Tripod attachment screw
Mic centering
Mics can be centered as you like. Please pay attention to the following, however, to enable more stable centering.
- Fix the boom so that the counterweight (4) end has some length, and place the counterweight (4) as far back as possible. Then, tighten the boom angle adjustment screw (5).
NOTE :
An acute boom angle (A) is more stable.
- Lengthen the boom at the mic end and adjust the height. Then, tighten the boom length adjustment screw (1).
Specifications
Height: 1140–1620 mm
Boom length: 580–900 mm
Weight: 3.9kg
Trademarks
- TASCAM is a trademark of TEAC Corporation, registered in the U.S. and other countries.
- Other company names, product names and logos in this document are the trademarks or registered trademarks of their respective owners.
Documents / Resources
References
Download manual
Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.
Download Tascam TM-AM3 - Studio Microphone Stand with Tripod Base Manual
Advertisement
Thank you! Your question has been received!
Need Assistance?
Do you have a question about the TM-AM3 that isn't answered in the manual? Leave your question here.