Table of Contents
Advertisement
IMPORTANT SAFETY INSTRUCTIONS
Front
OPEN switch
p
Slide this switch away from the
control panel and insert and remove discs.
(stereo minijack)
a
PHONES jack
Connect headphones to this jack to output the CD
playback signal and the input signal from the
jacks.
MIC IN 2
(stereo minijack)
LINE OUT jack
s
Outputs the CD playback signal and input signal from the
MIC IN 1 and MIC IN 2
speakers with built-in amplifiers or similar equipment.
INPUT dial
d
Adjusts the input signal level of the
jacks. Both mic input levels are adjusted simultaneously.
Names and functions of parts
jack to open the
PHONES
MIC IN 1 and
jacks. Connect an audio system,
MIC IN 1 and MIC IN 2
MIC IN 1 and MIC IN 2 jacks
f
Use each of these jacks to connect a mic or a contact mic
attached to an instrument.
Rear
g
DC IN 5V jack
Connect a TASCAM PS-P520 AC adapter (sold
separately).
POWER switch
h
Turn the power ON and OFF. Press and hold the switch for
more than one second to turn the power ON and OFF.
(standard phone jacks)
1
TASCAM CD-VT2
Advertisement
Table of Contents
