Playback - Tascam CD-GT2 Owner's Manual

Quick Start Guide—Basic Operation IMPORTANT SAFETY PRECAUTIONS
Connecting headphones
Connect headphones to the
unit. Turn the volume down to the minimum level using the
key on the control panel.
PHONES VOLUME (–)
Headphones
NOTE
Use the LINE OUT jack when monitoring with an audio
system or speakers with built-in amplification.
12
TASCAM CD-GT2
jack on the front of the
PHONES

Playback

Playing a CD
Press the key to start. Press the
¥/π
playback. Press the key to stop playback. Press the
STOP
or key to skip to the beginning of the previous or next
≤
track. Press and hold the
≤
fast forward ( ) or fast reverse (

track. Press the
FLASH BACK
the point three seconds earlier in the current track.
NOTE
You can change the number of seconds that pressing the
FLASH BACK key jumps in the track. (See "Jumping back
a few seconds (Flash Back)" on page 24.)
key again to pause
¥/π
or key during playback to
µ
) through the current
Ô
key during playback to jump to
µ