How To Use The Electronic Programming; Setting The Clock; Setting The Automatic Operation - Sunbeam Aroma Coffee PC4700 Instruction Booklet

Using your Aroma Coffee

How to use the Electronic Programming

(PC4700 model only)

Setting the clock

1. P lug the coffee maker into a 230-240 volt
AC power outlet and switch power on, the
numbers on the LCD will flash until you set
time of day.
2. T o set time of day press H (hour) button
to set the current hour. AM or PM will be
displayed.
3. P ress M (minutes) button until you reach
the current time.

Setting the automatic operation

After you have set the time, you may now set
the Automatic operation.
1. M ake sure the clock is set for the correct
time of day.
6
12 (contined)
™
2. F ill coffee maker with the desired amount
of water and coffee. Place the carafe into
position on the warming plate.
3. W hile holding down the PROGRAM button,
press the H and M buttons until the desired
brewing time is reached.
4. o nce the desired brewing time has been
reached, release the PROGRAM button and
the current time will be displayed on the
LCD.
5. P ress the AUTO button to set the coffee
maker to come on automatically at the
desired time.
6. A n illuminated small green light to the left
of the AUTO button indicates that the brew
cycle will begin at the set time.
7. P ress the AUTO button again to cancel the
automatic brew.